Samsung UA48H6400 E-Manual page 55

2.
Stop
Select when the TV attempts to connect to the network. Once the network connection has
been interrupted, select
Network Configuration
Connection verification cancelled.
Wired network connection test stopped.
Change Network
3.
IP Settings
In the
Mask, Gateway, and
●
Use one of the following methods to enter the numerical values.
Set the numbers using the
Using Samsung Smart Control: Press
Using the remote control: Enter the numbers directly using numerical button.
IP Settings
IP setting
IP Address
Subnet Mask
Gateway
DNS setting
DNS Server
OK
4.
The TV attempts to connect to the network again using the specified settings. A confirmation
message appears once a connection is established. Select OK.
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact your Internet service provider (ISP).
IP Settings.
IP Settings Retry
IP setting
screen, set the
DNS Server values, and then select OK.
u
and
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
Close
Enter manually, enter the
to
d
buttons.
KEYPAD
button and enter the numbers directly.
IP Address, Subnet