Requirements For Using Voice, Motion, Or Face Recognition - Samsung UA48H6400 E-Manual

Requirements for Using Voice, Motion, or Face Recognition

Requirements for Using Voice Recognition
●
Voice Control and the
"
Availability depends on the specific model and area.
Voice Recognition Environment Test
●
Perform the
and clarity of your voice and the ambient sound level of the surrounding area. Ambient noise
can cause Voice Controls to malfunction. (Suitable Ambient Noise Level: Less than 40 dB, *40
dB is the noise level inside a library or on a residential street during the day.) Visit the Samsung
website for a list of standard voice commands.
●
The voice recognition rate varies depending on the volume/tone, pronunciation, and ambient
sound environment (TV sound and ambient noise).
Requirements for Using Motion Recognition
●
Before using motion recognition, make sure the TV's camera has been turned on.
●
You should be located between 1.5m and 3.5m from the camera. The actual recognition range
may vary depending on the camera angle and other factors.
●
Motion Control relies on the TV camera and therefore will not function if the camera is pointed up
or down. Adjust the camera's angle using the wheel on the back of the camera. Do not point the
camera directly at the sun or any other light source or obstruct its view.
●
For the camera to recognise movement, you have to stand out from the background.
●
The appropriate ambient brightness is 50 to 500 lux. (100 Lux: Bathroom, 400 Lux: Living Room)
●
Avoid direct sunlight when using
Motion Control Environment Test
●
Run the
Motion Control.
Turn TV On
voice command should be used within 4m of the TV.
Motion Control.
prior to using Voice Control to test the level
to assess the camera's recognition range before using