Manual Channel Set - JVC HR-J461MS Instructions Manual

1 2
4 5
8
7
0
1
MENU
3
2
6
9
4
OK
PUSH JOG

Manual Channel Set

Store channels that were not stored during Auto Set Up (
or Auto Channel Set ( pg. 30).
ACCESS TUNER SET
SCREEN
1
Perform steps 1 – 3 of "Auto Channel Set" on page 30.
ACCESS CHANNEL LIST
2
Press PUSH JOG % fi to place the pointer next to "CH
EDIT", then press OK or PUSH JOG
SELECT POSITION
3
Press PUSH JOG % fi to place the pointer next to an
open channel position, then press OK or PUSH JOG
SELECT BAND
4
Press PUSH JOG % fi to place the pointer next to the
band of your choice, then press OK to initiate Manual
Channel Set.
BAND SELECT
VHF L
VHF H
UHF
[5/ ∞ ] =
[MENU] : EXIT
SET DESIRED STATION
5
The screen to the right
appears when a station is
detected.
If you do not want to store
the detected station...
Press PUSH JOG % fi to
place the pointer next to
"CONTINUE", then press
OK or PUSH JOG
Channel search will resume.
If you want to store the detected station...
Press PUSH JOG % fi to place the pointer next to
"STORE", then press OK or PUSH JOG
List appears again.
The blueback screen and the TV picture currently
being broadcast appear alternately for 8 seconds each.
If you want to store another channel, repeat steps 3 – 5.
When channel search completes for that band, the
Band Select screen appears again. To set channels for
other bands, select another band and start Manual
Channel Set again (
For fine tuning adjustment, see "Fine-Tuning
Channels" on page 33.
RETURN TO NORMAL
SCREEN
6
Press MENU.
EN
.
MANUAL CH SET
PLEASE WAIT
VHF L 100MHZ
[MENU] : EXIT
STORE
CONTINUE
[ 5 /∞] =
[MENU] : EXIT
.
. The Channel
step 4 and 5).
31
pg. 6)
.