Table of Contents
Advertisement
16
EN
Basic
Recording
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
1
RECORD
2
3
2
NUMBER
5
6
8
9
0
4
TV PROG
SP/LP/EP
PAUSE
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The counter is reset to 0:00:00 and the recorder
power comes on automatically.
Select the appropriate colour system by pressing the
COLOUR SYSTEM button (
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
SET TAPE SPEED
3
Press SP/LP/EP (
the recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of each first
SP and first LP (or EP) recording after inserting the
cassette (
pg. 18).
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
Recording Resume
Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless
the recorder's memory backup has expired.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
RECORDING
pg. 28).
). Check the SP/LP/EP indicator on
Record safety tab
Advertisement
Table of Contents
