Adjusting The Exposure Compensation - Canon PowerShot S30 User Manual

Adjusting the Exposure Compensation

Adjust the exposure compensation setting to avoid making the subject too dark
when it is backlit or shot against a bright background.
1
Press the
• The icon and exposure compensation bar will
appear on the LCD monitor if it is on.
Select a setting using B or A on the multicontroller.
2
setting using etting using
• The settings can be adjusted in 1/3 steps in the range of -2EV to +2EV. ngs can be adju gs can be adj
3
Press .
• You can also take the picture with the set exposure compensation value by
pressing the shutter button without pressing
• To cancel the exposure compensation, return the setting to
on the multicontroller.
4
Shoot the image. e ima ima
• If you pressed the shutter button at Step 3, the exposure compensation bar essed ssed
will reappear after the shot, allowing you to change the setting for the next pear after the pear after the
shot.
• This setting cannot be adjusted in the
can only be adjusted for the first image.
• The macro mode cannot be set while the exposure compensation bar appears on
the LCD monitor.
• The selected shooting mode will determine whether or not the exposure
compensation setting is cancelled when the camera is turned off (p. 90).
button once.
ng B or A B or or A
ng on on
djusted justed
ressing ressing
pensati ensat n, return the , return the
shut shutt tter button at tter button at r button te
hot, allo ot, allo
Shooting - Selecting Particular Effects
will will
sure co ure co pens pens
ing .
return th etting t tting t
and shooting modes. In
using B or A
mode, it
73