Installing A Cf Card - Canon PowerShot S30 User Manual

Installing a CF Card

1
Turn off the camera (p. 27, 29).
• Check that the power/mode indicator is not lit.
2
3
CF card Eject Button
• When the indicator on the left side of the viewfinder flashes green, the camera is e indicator on indicator on
writing, reading, erasing or transmitting an image to or from the card. Do not reading, erasing readi
perform the following, for image data may be lost or corrupted: the following, f the following,
- Do not shake the camera. t shake the ca t shake the ca
- Do not turn off the power or open the CF card slot/battery cover. turn off th turn off th
- Do not remove the CF card.
• Never open the CF card slot/battery cover when the power is on.
• Please note that CF cards formatted in or edited with other manufacturer's
cameras or application programs may not operate correctly in the camera.
Slide the CF card slot/battery cover in
the direction of the arrow to open the irection irection
cov cover. cov er. er.
Insert the CF card with the label facing
out and the arrow pointing in.
• Push the card in until the CF card eject button
fully extends.
• To remove the CF card, push the CF card eject
button and pull the card out. button button bu
t Butt Butt
the left side of t the left side of e left side o
g or transmitti g or transmittin or transmit
for image da for image d image
ard ard slot ard slo lot/battery lot/battery
n of the a n of the a of th arrow to arrow to
ve the CF ca ve the CF ca he CF ard, push t rd, push t
and pull the and pull the d pull th rd out rd out
he v he vi
g an an
Preparing the Camera
F card F card
21