Table of Contents
Advertisement
Using a handset as a room monitor
If you accept an incoming call, the room
monitor is suspended for the duration of the
call, but the function remains activated.
If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Warning
u
You should always check the opera-
tion of the room monitor before use.
For example, test its sensitivity.
Check the connection if you are
diverting the room monitor to an
external number.
u
When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the charging cradle. This
ensures that the batteries do not run
down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
¢
¢
v
í
Room Monitor
¤
Change multiple line input:
Room M.
Select On to activate.
Call to
Press the display key
nation number.
External number: Select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number:
handset or Call All if all registered hand-
sets are to be called)
Store number with
26
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
§Edit§
and enter desti-
¢
s (Select
§INT§
¢
§OK§
.
§Save§
.
Level
Set noise level sensitivity (Low or High).
¤
§Save§
Press
to save the settings.
Changing a set external
destination number
¢
¢
v
í
Room Monitor
s
Scroll to the Call to line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activating
the room monitor and entering the desti-
¢
nation number" (
¤
§Save§
Press
to save the settings.
Changing a set internal destination
number
¢
¢
v
í
Room Monitor
s
Scroll to the Call to line.
§Delete§
Press the display key.
§Edit§
Press the display key.
¤
Enter number as described in "Activating
the room monitor and entering the desti-
¢
nation number" (
¤
§Save§
Press
to save the settings.
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room monitor
settings (e.g. no ring tone) on the handset
will remain activated until you press the dis-
§OFF§
play key
on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
§Save§
with
(
page 26).
page 26).
page 26).
Hide quick links:
Advertisement
Table of Contents
