Console Port - Enterasys X-Pedition XSR-1805 Getting Started Manual

Cable, CompactFlash and Accessory Specifications

Console Port

The XSR comes equipped with a serial port useful for initial configuration.
Using a serial (null modem) cable, you can attach the router's DB‐9 Console port to a data terminal
port and directly configure the XSR over the asynchronous connection.Then, open a
communications or Telnet session to communicate with the router. If you use a communications
program, set the connection properties as follows:
• Connect using: Direct to COMx (where x is an unused COM port)
• Bits per second: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
Refer to Figure
A-4
Note: The XSR default login is Admin with no password.
A‐1 for pinout assignments.
Console
Pin 1
Pin 6
Figure A-1 Console Port Pinouts
Pin Signal
1
2
3
Pin 5
4
5
6
Pin 9
7
8
9
Carrier Detect (CD)
Receive Data (RX)
Transmit Data (TX)
Data Term Ready (DTR)
Ground (GND)
Data Set Ready (DSR)
Request to Send (RTS)
Clear to Send (CTS)
Ring Indicator (RI)