Chapter
7
Sending Firmware in Download Mode
Installing a Microsoft Loopback Adapter
Refer to this section when the laptop or PC is not network connected and
USB is needed for the download. If your laptop or PC is already network
connected, go to "Sending Firmware via USB" on page 147.
1. For Windows XP:
a. Click the "Start" menu.
b. Select "Control Panel".
c. Click "Add Hardware Wizard".
For Windows 7:
a. Click the "Start" menu.
b. Select "Control Panel".
c. Click "Hardware and Sound".
d. Under "Device and Printers", click "Device Manager".
e. Select your PC and start the "Add legacy hardware" process from the
2. Click "Next" in the initial "Welcome to the Add Hardware Wizard" screen.
3. The second screen asks if you have already connected the hardware to
your computer. Select "Yes" (Figure 36) and then click "Next".
Figure 36. Confirming Hardware Connection
148
"Action" menu as shown below.