Installation Procedure; Removing The Tape; Installing Options - TallyGenicom 9045N Quick Start Manual

Chapter 2 Setting Up Your Printer

Installation procedure

Removing
the Tape
Installing
Options
10
When the printer is first taken out of the packaging box, the covers of the printer
are taped as shown in the diagram. Remove the tapes. Remove the fuser locking
device by pushing the tabs as shown on the instructions at the rear of the printer.
If you have purchased any optional accessories, please refer to the User Guide on
the CD ROM.
If there are no optional accessories to install, proceed to the next section,
"Installing the Toner Cartridge".
Quick Start Guide