IBT Technologies MB860 User Manual page 44

BIOS SETUP
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
On-Chip USB1.1 Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Enabled.
USB Keyboard Support
The options for this field are Enabled and Disabled. By default, this field
is set to Disabled.
On-Chip USB2.0 Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Disabled. In order to use USB 2.0, necessary OS drivers must be
installed first.
Init Display First
This field allows the system to initialize first the VGA card on chip or
the display on the PCI Slot. By default, the PCI Slot VGA is initialized
first.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
Power On Function
This field sets how the system can be powered on from a system off state.
The options available include Hot KEY, Mouse Left, Mouse Right,
Any KEY, BUTTON ONLY and Keyboard 98. The default setting is
Button Only.
40 MB860 User' s Manual