CHASSIS ELECTRICAL
INTERMITTENT WIPER RELAY
(2) With the intermittent wiper relay connected to the wiring
harness connector, let the wiper operate intermittently and
check the voltage at terminal 0.
Condition
When wiper is stationary
When wiper is in operation
WASHER MOTOR
(1) When the washer motor is inspected, make sure that it is
mounted on the washer tank and that the washer tank is
filled with water.
(2) Connect the battery as shown to check whether water is
pumped out.
SERVICE POINT OF INSTALLATION
2. INSTALLATION OF WIPER ARM
After assembling the wiper blade to the wiper arm,, install
the wiper arm with its tip positioned along the ceramic part.
Standard
o v
Battery voltage