Wizard Setup; Access Point - D-Link DAP-1150 User Manual

Section 3 - Configuration
In AP mode, the DAP-1150 acts as a central connection point for any computer (client) that has an 802.11g or backward-compatible
802.11b wireless network adapter and is within range of the AP.
Wireless The Wireless Network Name is a unique name
Network Name that identifies a network. All devices on a network
(also called the must share the same wireless network name
SSID): in order to communicate on the network. If you
decide to change the wireless network name
from the default setting, enter your new wireless
network name in this field.
:
Site Survey
This button is unavailable in Access Point
mode.
Wireless
Auto channel selection is the default setting. First
Channel:
disable Auto Channel Scan (see below) and you
will be able to select a wireless channel.
Enable Auto Check the box to enable Auto Channel Scan.
Channel Scan: Enable this feature to auto-select the channel
for the best wireless performance.
Enable Hidden
Check the box if you do not want the SSID to be
Wireless:
broadcast by the DAP-1150. This prevents the
SSID from being seen by site survey utilities,
so any wireless clients will have to be pre-
configured with the SSID of the DAP-1150 in
order to connect to it.
Select a wireless security setting. Options are None, WEP, WPA, WPA2, or WPA2-Auto. See p.53 of this manual for a
Wireless
Security Mode: detailed explanation of the wireless security options.
D-Link DAP-1150 User Manual
Wireless Setup

Access Point

39