Assembly Access
4-47
9130K
Flexible Disc Drive
1. UNPLUG COMPUTER POWER CORD FROM AC OUTLET.
2. Remove front cover as previously described.
Note
Do not remove screws in following step. Loosen only far enough to
remove top cover.
3. Loosen, but do not remove, two # 1 Pozidriv screws that attach top cover to disc drive
(Figure 4-49), and lift top cover off drive. Retain top cover for installation on replacement
disc drive.
4. Disconnect ground cable from lug (Figure 4-49).
*
(HIDDEN)
*
GROUND CABLE CONNECTOR
*
#1 POZIDRIV SCREW
Figure 4-49. Releasing Flexible Disc Drive