Insert Editing [Dd858E/Eh Only] - JVC HR-DD858E Instructions Manual

40
EN
Insert Editing
(HR-DD858E/EH
only)
Recorder
Audio/Video signal
Player
1
4
7
0000
1
Your recorder
TIME SCAN SHUTTLE
Another recorder
– –:– –
2 3
2
5 6
8 9
0
4
TV PROG
PAUSE
Insert editing replaces part of the recorded scene with new
material. Both the picture and Hi-Fi audio soundtrack are
replaced with new ones, while the normal audio soundtrack
remains unchanged. If you wish to change the normal audio
track as well, use the audio dubbing function simultaneously.
Use your video recorder as the recorder.
Source tape
Before insert editing
Recorded tape
After insert editing
MAKE CONNECTIONS
1
Connect the player's VIDEO OUT and AUDIO OUT
connectors to your recorder's VIDEO and AUDIO
connectors on the front panel.
SET INPUT MODE
2
Press NUMBER key "0" and/or TV PROG so that "F-1"
appears in place of a channel number.
LOCATE END POINT
3
Load the recording cassette into your recorder, and play
it back to determine the edit-out point (the end of the
segment to be replaced) using the JOG/TIME SCAN
SHUTTLE controls or
RESET THE COUNTER
4
Press 0000 to change the counter display to "0:00:00".
LOCATE START POINT
5
Determine the edit-in point (the beginning of the
segment to be replaced) using the JOG/TIME SCAN
SHUTTLE controls or
Be sure to engage the Still mode at the edit-in point.
EDITING (cont.)
Normal audio
track
Video/Hi-Fi
audio track
and PAUSE.
and PAUSE.