Toshiba SDV391U Service Manual page 41

1-4: DVD PCB (Refer to Fig. 1-4)
Remove the 3 screws 1.
1.
Remove the 4 screws 2.
2.
3. Disconnect the following connectors:
(CP4002 and CP8102).
4. Remove the DVD PCB in the direction of arrow.
1
1-5: VCR DECK (Refer to Fig. 1-5)
NOTE
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1. Move the Cassette Holder Ass'y to the back side.
Remove the screw 1.
2.
3. Remove the FE Head.
Remove the 3 screws 2.
4.
5. Disconnect the following connectors:
(CP101, CP102, and CP3001).
6. Remove the AC Head Cover and VCR Deck in the
direction of arrow.
2
1
FE Head
VCR Deck
DISASSEMBLY INSTRUCTIONS
1
1
DVD PCB
2
2
2
2
Fig. 1-4
2
2
AC Head Cover
Fig. 1-5
1-6: VCR PCB (Refer to Fig. 1-6)
Remove the screw 1.
1.
Remove the 2 screws 2.
2.
Remove the screw 3.
3.
4. Remove the VCR PCB in the direction of arrow.
3
B1-2
VCR PCB
1
2
2
Fig. 1-6