LevelOne FBR-1461 User Manual page 38

Adsl2+ modem router w/ qos

Hide thumbs Also See for FBR-1461:

Table of Contents

5.3.1.1 Ethernet

The router supports more than one Ethernet IP addresses in the LAN, and with distinct LAN

subnets through which you can access the Internet at the same time. Users usually only

have one subnet in their LAN. The default IP address for the router is 192.168.0.1.

 IP Address: The default IP on this router.

 Netmask: The default subnet mask on this router.

 RIP: RIP v1, RIP v2 Broadcast, RIP v2 Multicast and RIP v1+v2 Broadcast.

5.3.1.2 IP Alias

This function allows the creation of multiple virtual IP interfaces on this router. It helps to

connect two or more local networks to the ISP or remote node. In this case, an internal router

is not required.

 IP Address: Specify an IP address on this virtual interface.

 Netmask: Specify a subnet mask on this virtual interface.

Table of Contents