Manual Tracking; Instant Review - JVC HR-A630EK Instructions Manual

REVIEW
2
1 2
4 5
7 8
0
SP/LP

Manual Tracking

Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. buttons.
q
6
1
2
3
6
9
3
TV PROG.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
1
NOTE:
OVERRIDE AUTOMATIC
TRACKING
Press SP/LP ( ) on the remote to engage manual
tracking.
ADJUST TRACKING
MANUALLY
Press TV PROG. + or – to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
Press SP/LP ( ) on the remote to re-engage auto-
matic tracking.
ACTIVATE INSTANT
REVIEW
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many
programmes have been recorded. If you have, for
example, 3 programmes, "REV 3" appears and blinks.
To watch the first of the 3 programmes, press REVIEW
three times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
Instant ReView is not possible while the recorder is in the
Timer mode.
13