Regular Timer Programming - JVC HR-A637E Instructions Manual

20
EN
Regular Timer
Programming
Remember, the clock must be set before you can programme
the timer ( pg. 8).
Before performing the following steps, insert a cassette with the
safety tab in place. The recorder power will come on automati-
cally.
ACCESS TIMER PROGRAM-
MING DISPLAY
1
Press PROG.
ACCESS PROGRAMME
DISPLAY
2
Press START +/–.
SP
If you're not receiving PDC/VPS, press NUMBER key
"7" to set to "OFF" so that the indicator disappears
( pg. 21).
ENTER PROGRAMME
START TIME
3
Press START +/– to enter the time you want recording
to start.
Start time
≠
SP
Press and hold START +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on the front
display panel. The date you enter appears in its place.)
Stop time
≠
TIMER RECORDING (cont.)
ENTER CHANNEL
POSITION
6
Press TV PROG. +/–.
Day Month
≠
≠
SP
D M
SET TAPE SPEED
7
Press SP/LP ( ) to set the tape speed.
RETURN TO NORMAL
DISPLAY
8
After confirming all information is correct, press OK
and the normal display appears.
Repeat steps 1–8 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
9
Press TIMER.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for
daily serials (Monday–Friday). "W" or "D" appears on the
front display panel.
NOTES:
For safety, your recorder disables all other functions while in
the Timer mode. If you want to use the recorder but its Timer
mode is engaged, press TIMER and all other functions are
operable. To re-engage the timer, press TIMER.
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "FULL" appears on the front display panel. To record
the extra programme, you must first cancel any unnecessary
programmes ( pg. 21).
To Satellite Tuner Users
When using the Regular Timer Recording method to timer-
record a satellite programme, you must select "AU2" in step
6.
Before the selected programme begins, set the satellite
tuner for the appropriate channel, then set the tuner's timer.
If your satellite tuner doesn't have a timer, leave its power
on.
Channel position
≠