Advertisement
The commands in Table 2 are used to configure the modem .All other AT commands
specified by leading +C are descripted in the AT Command Set Reference Manual.
Command
Function, defaults
+CBST
7,0,1 (9600 bps)
+CRLP
61,61,58,6
+CR
0
Table 2: Local AT+C (Cellular) Commands
S-Register
Function (default values in bold type)
S 0
The number of rings before the Gipsy Soft answers the call (Default: 0, does not answer)
S 3
Command termination character and first character of response trailer (CR)
S 4
Second character of response trailer (LF)
S 6
Editing character; erases the previous character (BS)
S 6
Escape character
S 7
Wait for carrier after dialling (in seconds). (Default: 60)
S 8 + S 9
No Action
S 10
Delay between Lost Carrier and Hang up in 0.1 sec. (Default 2 = 200ms)
S 11 .. S17
No Action
S 18
Bit
0
0 no GSM exit cause
1
0 no SMS Indication '+C...'
S 19 ... S99
No Action
Table 3: S-Registers
Modem Command Set Reference Manual
Implementation comments
1 with GSM exit cause
1 with incoming SMS Indication '+C..'
Reference
GSM07.07
GSM07.07
GSM07.07
page 7 of 7
Advertisement
