JVC BR-DV600AE Instructions Manual page 23

Display
COPY INHIBIT The user attempts to record signals protected with the copy guard.
REC INHIBIT The user attempts to record on a write protected cassette tape.
(The rear slide is pushed to "SAVE".)
A. DUB INHIBIT The user attempts to perform audio dubbing on a write protected cassette tape.
(REC TAB) (The rear slide is pushed to "SAVE".)
A. DUB INHIBIT This message is displayed when audio dubbing is attempted under the following con-
(48K) ditions:
• The AUDIO MODE item of the AUDIO/VIDEO menu is set to 48K.
• The tape is recorded with a sample frequency of 48kHz.
A. DUB INHIBIT The user attempts to perform audio dubbing on a tape recorded in the LP mode.
(LP)
A. DUB INHIBIT The user attempts to perform audio dubbing on a blank tape.
(BLANK)
A. DUB INHIBIT The user attempts to perform audio dubbing during DV signal input. (The INPUT SEL.
(DV) switch is set to "DV")
A. DUB INHIBIT This message is displayed when the signal system is changed during audio dubbing
(NTSC/PAL) (NTSC or PAL).
A. DUB INHIBIT The user attempts to perform audio dubbing on a DVCAM format tape.
(DVCAM)
OPERATION This message is displayed when a button on the unit is pressed while the OPERA-
LOCK TION LOCK function is engaged (ie, the OPERATION item of the SYSTEM (2/2) menu
is set as "ON").
Warning display : When anomalies occur in the VTR, warning messages with error
3 2 K C H – 1 / 2
D R UM MO T O R F A I L U R E
1 0 / 1 0 / 0 2
1 2 : 0 0 : 0 0
codes will be displayed.
0 0 0
S P
W A R N I N G 7 0 0 1
S T A N D B Y - O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
Contents
m i n
Warning display
For details, please
refer to page 66,
"Warning Display".
E-23