Recommended Tools & Equipment - Atwood Pilot 6 Gallon User Manual

Recommended Tools and Equipment
U-Tube Manometer - This is the most accurate device for measuring gas pressure. If you use a dial-type
manometer, calibrated it periodically.
Multi-meter - This is the most versatile meter and will test continuity and 12VDC. These tests will allow one to
verify voltage problems or faulty components. The entire electronic system can be tested with this meter.
U-TUBE MANOMETER
with 1/8" pipe nipple
Fill here
7
6
5
4
3
2
1
0
Correct
1
water
2
level
3
4
5
6
7
Circuit Board Tester - The tester is capable of testing any of the circuit boards (Fenwal and Channel models)
that we have used on our water heaters. It is a simple table top device that will diagnose the following items on
a circuit board: power circuit, sense circuit, spark generation and the lock-out mode. For use on circuit boards
with a flying lead connection, splice a wire into the black wire of the tester harness with a 1/4˝ male terminal on
the free end.
CIRCUIT BOARD TESTER
Common Hand Tools - 1/8˝ and 1/4˝ nut drivers, open end wrenches, flat blade and Phillips screw drivers.
Leak Test Solution - A solution that bubbles when applied to gas fittings or connections showing where a gas
leak is present.
Manometer
connection
P/N 32779
15
MULTI-METER TO TEST
CONTINUITY & VOLTAGE