Connecting The E20 To The Lan - Cisco E20 Administrator's Manual

Cisco IP Video Phone E20
Contents Introduction

Connecting the E20 to the LAN

Optional PC connection: If you have a single LAN wall outlet only, you may
connect your PC to the PC-socket of the E20.
Your PC and the E20 will then share the LAN connection.
Connect
Optional PC USB stick for
connection
screensaver
Power supply Local area
network (LAN)
Adjusting the E20 camera
Privacy shutter
Focus
open / close
ring
D14330.12 Administrator guide Cisco IP Video Phone E20, TE4.1 November 2011.
All contents are Copyright © 2010–2011, Cisco Systems, Inc. All rights reserved.
Deploying E20
Optional telephone
style headset
connection
Handset
Before you start making video calls,
make sure that your picture is displayed
properly.
1. Open the privacy shutter by turning the
front ring of the camera.
2. Display your own picture by pressing
the key.
3. Adjust your picture vertically by using
the up and down key.
4. Adjust sharpness by turning the focus
ring on the camera.
Using E20 Using E20 The settings
The E20 keyboard
Softkey control buttons
Navigation keys and OK key
Show and hide main menu
This part is similar to, and works in
the same way as, a telephone
Open the phone book
Display selfview (what
others see from your
system)
Switch your microphone
on and off
Listen through
headset
10
Administrator guide
Advanced settings Contact us
Listen to voice mail
For future applications
Switch your camera
on and off
Listen through built-in
speaker
Volume control
www.cisco.com