If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode, you will
find them in Aux. WAN IP for your selection.
Enable
Private IP
Choose PC
Vigor2920 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Check to enable the DMZ Host function.
Enter the private IP address of the DMZ host, or click Choose PC to
select one.
Click this button and then a window will automatically pop up, as
depicted below. The window consists of a list of private IP addresses
of all hosts in your LAN network. Select one private IP address in
the list to be the DMZ host.
When you have selected one private IP from the above dialog, the IP
address will be shown on the following screen. Click OK to save the
setting.
46