General Setup - Draytek Vigor2920 User Manual

supported 3G USB Modem will be listed on Draytek web site. Please visit www.draytek.com
for more detailed information.
Below shows the menu items for WAN.
3 . 1 . 2 G e n
3 . 1 . 2 G e n
This section will introduce some general settings of Internet and explain the connection modes
for WAN1 and WAN2 in details.
This router supports dual WAN function. It allows users to access Internet and combine the
bandwidth of the dual WAN to speed up the transmission through the network. Each WAN
port (WAN1- through WAN port/WAN2- through LAN1 port) can connect to different ISPs,
Even if the ISPs use different technology to provide telecommunication service (such as DSL,
Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the
traffic will be guided and switched to the normal communication port for proper operation.
Please configure WAN1 and WAN2 settings.
This webpage allows you to set general setup for WAN1 and WAN respectively.
Note: In default, WAN1 is enabled. WAN2 is optional.
Enable
Display Name
Physical Mode
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
e r a l S e t u p
e r a l S e t u p
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for the WAN1/WAN2 interface.
For WAN1, the physical connection is done and fixed through
Ethernet port; yet the physical connection for WAN2 is done
through an Ethernet port (P1) or USB port.
27 Vigor2920 Series User's Guide