Starting The Encoding - JVC HDTV Encoder DM-JV600U Instructions Manual

Starting the Encoding

There are 2 ways to start the encoding. One is to start the encoding automatically and the other one
is to start it manually by setting the menu.
18
Start the encoding automatically
Operation Flow Chart
Press the ENTER button
Display the Initial Param Menu screen according to
steps 1~5 on Page 16 "How to Change Menu Setting".
Press the 8 / 9 buttons
Select the Start Mode item and press the ENTER but-
ton.
Press the 8 / 9 buttons
Select the "Auto" and press the ENTER button.
Press the ESC button
Press the ENTER button
The encoding will start after the menu setting is saved
and reboot of this unit is performed.
Display 8 / 9 / ; / :buttons
POWER
MULTI FORMAT
HIGH DEFINITION
FAULT
TELEVISION
ENCODER
POWER
ON
ENTER ESC
OFF
ENTER ESC
button button
Display Flow Chart
I n i t i a l P a r a m M e n u
> C o n t r o l M o d e : L o c a l
I n i t i a l P a r a m M e n u
> S t a r t M o d e : A u t o
I n i t i a l P a r a m M e n u
> S t a r t M o d e : A u t o
I n i t i a l P a r a m M e n u
> Sa ve & Re bo o t ?
. . N o w I n i t i a l i z i n g . .
HDTV ENCODER
DM-JV600U
Memo Memo
The default setting of the
Start Mode item is set to
"Auto" in order to start the
encoding automatically.
☞
Page 13 "Start Mode
item"
Memo Memo
The encoding can be man-
ually started or stopped if
the Start Mode item in the
menu is set to "Manual".
☞
Page 19 "Start the
encoding manually"