AOC LM760S Service Manual page 38

17" LCD Color Monitor
the same.
7. Select 7x00 item to adjust cool color-temperature and select 6x00 to adjust warm color- temperature. It can
reach to the best effect through adjusting R/G/B value if it inclines to green or blue.
8.
Select Exit to the upper menu after completing the adjustment. Then press POWER OFF to exit and save it.
10.3 Steps for Writing DDC:
1. Employ PC, and connect the DDC-writing instrument and the instrument that is ready for writing into DDC to
the power of 12v. Connect the signal cable of the latter to D-USB or DVI of DDC-writing instrument (The data-writing
of monitor needs transfer-interface) and link the DDC-writing instrument with PC through printer interface. (See the
schematic picture below)
Connection of DDC-writing instrument for VGA
2. Seek the document with the expanded name of .BAT in DDC file of this model. It appears the indication of
"Input Serial No.："after dual-click the document to be ready for DDC-writing.
3. Input the serial number of the product (For instance: AOC LM729 is 13 bits), then press ENTER to start
writing
4.Check the indication of DDC-writing program at the end. When you see the picture as the schematic picture
above, the "Data compare OK!" means being written well and that's the end. Please check if the Manufacturer
Name, Vendor Assigned Code, Monitor Name, Serial Number, Week of Manufacture, Year of Manufacture are
right. It will appear "Data compare error ！" to indicate failure if the DDC-writing doesn't perform well. Please
.
38
AOC LM760S