Toshiba 32E20U Owner's Record page 19

Note:
The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals (
page 44).
Some PC models cannot be connected to this TV.
An adapter is not needed for computers with a
compatible mini D-sub15-pin terminal.
Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
Signal names for mini D-sub 15-pin connector
Pin Signal Pin Signal
No. name No. name
1 R 6 Ground
2 G 7 Ground
3 B 8 Ground
4 Reserved 9 5V
5 Reserved 10 Ground
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the
TV, use an HDMI-to DVI adapter cable and analog
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog
cables are not necessary ( page 16).
TV back panel
Computer
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p
(60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 57.
Chapter 2: Connecting your TV
Note:
Pin Signal
No. name
11 Reserved
12 SDA
13 H-sync
14 V-sync
15 SCL
PC audio
cable
PC audio
output
The edges of the images may be hidden.
If receiving a 480i (HDMI), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
19