Fuses; Installing Battery - BMW K 1600 GTL Rider's Manual

Installing battery

8
Place battery in battery com-
partment, positive terminal on
132
right in direction of travel.
z
Install the retainer and install
screws 3.
An incorrect installation se-
quence increases the risk
of short-circuiting.
Always observe the proper
sequence.
Connect battery positive lead 2
first and close the cover.
Then install negative battery
cable 1.
Installing seat ( 107).
Switch on ignition.
Settings
Set the time in
Time
- and set the date in
Settings Date
-

Fuses

Replacing fuses
Switch off ignition.
Remove seat ( 105).
If defective fuses are
bridged, this results in a
danger of short-circuit and thus a
danger of fire.
Replace defective fuses with new

fuses.

Consult the fuse assignment
diagram and replace the defec-
tive fuse.
If the fuses blow frequently,
have the electrical system
checked by an authorized spe-
cialized workshop, preferably a
BMW Motorrad retailer.
Installing seat (
Fuse assignment
.
1 40 A
Motorcycle electronics
2 40 A
Motorcycle electronics
with Electronic Suspen-
sion Adjustment (ESA)
ESA
3 30 A
Engine electronics
4 Fuse box
Numbering of the fuses as
per label on lid of fuse box:
-1 not in use
107).
OE