Panasonic KX-TD816 Installation Manual page 140

4.2 E & M (TIE) Line Installation
6.
Insert the Amphenol Connector into the jack.
Note
• To fix the connector, refer to Section 2.4.5 Installing Expansion Unit, Amphenol
• For jack connection, please see "Pin Number Chart" in Section 4.2.3 E&M (TIE)
7.
Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8.
Close the cabinet cover and secure the outside screw.
9.
Cover the cords with the cord holder (included).
140
57JE Type (screw-attach-type 50-pin connector) Connection for KX-TD170.
Line Connection.
Cord holder
Connector type
50-pin (Amphenol 57JE
series or the equivalent)
25 1
50 26
To terminal Board from
the E&M (TIE) Line.
E & M Installation