Handset Security; Phone Lock; Password Lock - Samsung SoftBank 707SC II User Manual

Tip
• USIM password
This is a password dedicated to USIM Card authentication. If
USIM password matches, another USIM Card may be used in
707SC .
Change USIM password each time the USIM check setting is
set to Enable.
• When you forget your USIM password
Insert a USIM Card (with USIM lock set to Enable) in
707SC and execute All reset ( P.13-11).

Handset Security

Phone Lock

Default Setting Disable
Set Phone lock to Enable; then Phone Password entry is
required each time the power is turned on.
APress c and select Settings
Security Phone lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)

Password Lock

Default Setting Disable
Set Password lock to Enable; Press any key in Standby;
Phone Password entry window appears. Enter Phone
Password to cancel Password lock; 707SC
are enabled.
APress c and select Settings
Security Password lock
BSelect the setting and press c (Save)
CEnter Phone Password and press
c (Confirm)
13
operations
13-5