Using External Equipment - JVC UX-V20R/UX-V10 Instructions Manual

Using External Equipment

SLEEP
AUX
AUX
CD
REPEAT
PROGRAM
RANDOM
AHB
PRO
AHB PRO
VOLUME +, –
REMOTE CONTROL RM-SUXV20R
Listening to External
Equipment
You can connect an audio equipment — used only as a playback
device.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
1 Set the VOLUME control to the minimum
position.
2 Press the AUX button.
"AUX" appears on the display.
3 Start playing the external equipment.
4 Adjust the VOLUME control to the desired
listening level.
5 Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to
control the tone. (See "Controlling the Tone (Bass/Treble)" on
page 7.)
To exit from AUX mode, select another source.
Notes:
• For operation of the external equipment, refer to its
Instructions.
• For recording from the external equipment, refer to "Standard
Recording" on page 16.
18
FM AUTO
DISPLAY
MODE PRESET
TAPE CD
FM/AM
DISPLAY
PTY/EON UP
MODE
SET
DOWN
BASS
BASS TREBLE CANCEL
TREBLE
VOLUME
STANDBY
AUX
AUX
REC
REV
MODE
TAPE FM/AM CD
PHONES
DOWN MULTI CONTROL UP
AHB
PRO AHB PRO
VOLUME
TIMER
VOLUME +, –
CLOCK
CD
OPEN/CLOSE