Mounting The Unit To A Fixed Surface - Motorola Satellite 9570 User Manual

Mounting the Unit to a Fixed Surface

20 Setting Up the 9570 Portable Dock
Attaching the Antenna Clips
1. Locate the two antenna clips.
2. Attach the first clip to the mounting base:
a. Position the clip
above one of the
cutouts at the
end of the
mounting plate.
b. Push the clip
down onto the
cutout until it
snaps into
place.
3. Repeat step 2 to
attach the second antenna clip.
Attaching the Mounting Base
1. If mounting to a wall, ensure that the wall is
strong enough to support the combined
weight of the 9570 Portable Dock and the
9500 Portable Phone (approximately 4.2
lbs.).
2. Position the mounting base with the hollow
side out.
• If mounting to a wall, position the base
with the antenna clips at the bottom.
• If mounting to a horizontal surface,
position the base with the antenna clips at
the top (away from you).
3. Using the mounting base as a template, mark
the locations of the holes for the mounting
screws.
4. Remove the mounting base, and use an awl
or similar device to start the holes at the
marked location.