Erasing The Tracks Or Groups - JVC UX-G500V Instructions Manual

To move the character entry position
Move the entry position to the right.
Move the entry position to the left.
To erase a character
When the character entry position is on the character you
want to erase...
(while holding...)
To enter a space
Select the space from "Symbols." (See "Available
Characters" on page 27.)
• You can also enter a space at the end of a title by pressing
3.
To quit title entry
• The entered titles are not stored.

Erasing the Tracks or Groups

You can erase tracks/groups on the USB device.
• Once the tracks are erased, you cannot resume them.
• To go back to the previous step, press CANCEL (while
holding SHIFT).
• To quit erasing, press 7.
1
Start and stop playback of the USB device.
2
Select a track/group you want to erase.
To select a track:
To select a group:
(while holding...)
3
Select the track/group title erase mode.
(while holding...)
4
Confirm the selection.
Remote 5
Erase your selection.
ONLY
(Canceled)
28