CAUTION: DO NOT PRESS DOWN ON CUP HEATER WITH HANDS AT ANY TIME. NOTE: The cup heater is meant only to heat up your espresso cup, and should not be for any other usage.
1. Cup heater is always in ready mode (except during
heat up). Take cup and place it upside down on cup
heater. Make sure grill is properly clipped into place
on the base.
Keep cup pressed down during entire heat up to avoid
injury. Removing cup form the 3 rips will stop the flow
of water.
1: 25 ml
2: 30 ml
3: 40 ml
4: 50 ml
5: 60 ml
Note: Water from cup heater is collected in drip tray. When red water level indicator rises above grid, empty drip tray.
Note: Maximum, 2 functions run simultaneously: Coffee & Aeroccino – Coffee & Cup heater – Cup heater & Aeroccino (coffee preparation is on hold until cup heating operation is finished).
2. 3 rips must be pressed down
simultaneously to activate flow
of water.
4. Once jet has stopped, remove cup and place it on cup support
to start your coffee.
1: 70 ml
2: 90 ml
3: 110 ml
4: 130 ml
5: 150 ml
3. A jet of hot water heats a standard Nespresso cup within