Suzuki DL1000AL4 Owner's Manual page 15

TAKING OUT THE MOTORCYCLE
Bind a hoist band around the handlebar clamps as
shown in the photograph.
NOTE:
Lift the motorcycle a little by using a hoist to pre-
vent the motorcycle from falling down.
Binding a hoist band to the handlebar or grips
can damage the motorcycle parts.
Be sure to bind a hoist band around the handle-
bar clamps.
A: Hoist band
Remove the crate axle bracket from the crate base.
NOTE:
The bracket and bolt are not necessary to assem-
ble the motorcycle.
A: Crate axle bracket
B: Bolt
1. Lift the front of motorcycle by using a hoist.
2. Raise the rear of motorcycle.
3. Pull the crate base forward, then balance the
motorcycle.
14
NOTICE