Dell B1165nfw User Manual page 189

Fax menu
Item
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
Send Report
select On-Error, the machine prints a report only when
a transmission is not successful.
Prints a transmission report with a minimized image of
Image TCR
the first page of the fax sent.
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
Dial Mode
country.
Sends faxes at a preset toll-saving time to save on call
costs. This setting may not be available depending on
Toll Save
your country.
Makes it easy to configure the necessary fax options
Setup Wizard
such as machine ID, fax number, etc.
Description
5
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 29).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.
• Or press Setup > Machine Setup > Default Setting > Fax Default.
Item
Receive Mode Selects the default fax receiving mode.
Specifies the number of times the machine rings before
Ring To Answer
answering an incoming call.
Automatically prints the page number, and the date
and time of reception at the bottom of each page of a
Stamp RCV Name
received fax.
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
Rcv Start Code machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Description
189
3. Useful Setting Menus