JVC RX-DV3SL Instructions Manual page 65

Operating Other Manufacturers' Equipment
7
To change the transmittable signals for
operating other manufacturers' DBS tuner
1. Press and hold
STANDBY/ON DBS.
2. Press DBS.
3. Enter manufacturer's code using
the number buttons (1–9, 0).
See to the right to find the code.
4. Release
You can turn on and off the DBS tuner:
STANDBY/ON DBS : Turns on or off the DBS tuner.
After pressing DBS, you can perform the following operations
on a DBS tuner:
TV/DBS CH + or – : Changes the channels.
1 – 9, 0, 100+
Note:
• Refer also to the manual supplied for your DBS tuner.
5. Try to operate your DBS tuner by pressing
STANDBY/ON DBS.
When your DBS tuner turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of DBS
tuner, try each one until the correct one is entered.
DBS
TV
SURR ON/OFF
SURR MODE
STANDBY/ON DBS.
: Selects the channels.
For channel number 5, press 5.
For channel number 10, press 1, then 0.
For channel number 23, press 2, then 3.
For channel number 135, press 100+, 3,
then 5.
TV RETURN will function as the
ENTER button if your equipment
requires pressing ENTER after selecting a
channel number.
JVC
Amstrad
STANDBY/ON
VCR TV AUDIO
Blaupunkt
Echostar
General Instrument
Goldstar
Grundig
TAPE CDR FM/AM
Hamlin/Re
Hirshmann
DBS VCR DVD
Instrument
Itt/Nokia
Jerrold/G
Kathrein
NEC
EFFECT CENTER
1 2 3 Oak
Orbitech
TEST REAR·L
4 5 6
Panasonic
REAR·R
Philips
7 8 9
Pioneer
– +
SUBWOOFER
RCA
10/0 +10
Samsung
100+
Schwaiger
Scientiff
Siemens
Sony
Technisat
Tocom
Zenith
*"57" is the initial JVC code.
Note:
• Manufacturers' codes are subject to change without notice. If
they are changed, this remote control cannot operate the
equipment.
Manufactures' codes for DBS tuner
Manufacturer
56, 57*, 67
43 – 49
30
50, 51, 67
29
31
32, 33
01 – 05
48, 52 – 55
68
34
06 – 14
52, 58 – 63
35, 36
15 – 17
48
18 – 20
37, 38
21, 22
65
39, 40
61, 64
23 – 25
41, 42
66
48
26
27, 28
Codes
62