Specifications - JVC RX-668VBK Instructions Manual

Audio/video control receiver
Table of Contents

Advertisement

Specifications

Amplifier
At Surround operation:
Total Harmonic Distortion (8 ohms, 1 kHz):
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 ohms)
RIAA Phono Equalization:
Video
Video Input Sensitivity/Impedance:
Video Output Level:
Composite video: VCR, MONITOR OUT
S-video: MONITOR OUT
Signal-to-Noise Ratio:
On-Screen Color System:
Output Power
At Stereo operation:
Front channel:
Center channel:
Rear channels
0.8%* at 100 watts output (* Measured by JVC Audio Analysis System)
PHONO (MM):
CD, TAPE/MD, TV SOUND, VCR, DVD:
TAPE/MD, VCR:
PHONO:
CD, TAPE/MD, TV SOUND, VCR, DVD:
PHONO:
CD, TAPE/MD, TV SOUND, VCR, DVD:
±1.0 dB (20 Hz to 20 kHz)
Composite video:
VCR, DVD:
S-video: DVD
(Y: luminance):
(C: chrominance, burst):0.286 Vp-p/75 ohms
1 Vp-p/75 ohms
(Y: luminance):
(C: chrominance, burst):0.286 Vp-p/75 ohms
Synchronization:
Negative
45 dB
NTSC
100 watts per channel, min. RMS, driven into 8
ohms, 40 Hz to 20 kHz with no more than 0.8%
total harmonic distortion.
100 watts per channel, min. RMS, driven into 8 ohms at 1 kHz
with no more than 0.8% total harmonic distortion.
100 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
than 0.8% total harmonic distortion.
100 watts per channel, min. RMS, driven into 8 ohms at 1 kHz,
with no more than 0.8% total harmonic distortion.
2.7 mV/47 k ohms
220 mV/47 k ohms
220 mV
70 dB/77 dB (at REC OUT)
87 dB/80 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 20 kHz (±1 dB)
1 Vp-p/75 ohms
1 Vp-p/75 ohms
1 Vp-p/75 ohms
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-668vbkj

Table of Contents