Playing Back From Usb Mass Storage Class Device; To Connect The Usb Mass Storage Class Device; Basic Operations - JVC NX-PS1 Instructions Manual

Playing Back from USB mass storage class device

This System is equipped with a USB MEMORY terminal on the front panel. You can connect a USB mass storage class
device such as a USB flash memory device, Digital Audio Player (DAP), etc. to this System.
This System cannot recognize a USB mass storage class device whose rating exceeds 5V/500mA.

To connect the USB mass storage class device

When connecting a USB mass storage class device, refer
also to its manual.
DAP
• When disconnecting the USB mass storage class device,
make sure that the System is in the stop condition.

Basic Operations

Button
On the On the
Unit remote
Starts playback / Pauses
Stops playback
Increases the track numbers.
Press and hold : Fast forward search
Decreases the track numbers.
Press and hold : Fast reverse search
For MP3/WMA playback
1
Set Number select mode.
2
or
Group number
3
Start playback.
• To exit from the Number select mode, press CANCEL.
9
VO LU ME
FU NC TIO
N
STA ND BY
US B
ME MO RY
AU X
PH ON ES
or
Function
Input the Group number, then
input the Track number.
Track number
NOTES
• You cannot send any data to your USB mass storage class device
from this System.
• Always set volume to the minimum level when connecting or
disconnecting the other equipment.
• Connect the USB mass storage class device directly to the system.
Using a USB hub may result in malfunction.
• Coded or encrypted tracks in a special method cannot be played
on the unit.
• The USB mass storage device's battery is charged while the
System is turned on or on standby (except in ECO mode).
• An iPod does not play on the USB MEMORY terminal.
"RESTRICT" appears on the display when an iPod is connected
to the USB MEMORY terminal while USB MEMORY is
selected for the source.
• This System may not playback some USB mass storage devices
and does not support DRM (Digital Rights Management).
• Some MP3/WMA files cannot be played back and will be
skipped.
This result from their recording processes and conditions.
• This System can play back MP3/WMA files with the extension
code <.mp3> or <.wma> (regardless of the letter case–upper/
lower).
• Some characters or symbols will not be shown correctly on the
display.
The maximum character number shown on the display is 32
(without the extension code) for files, and 30 for ID3 tag.
• It is recommended that you make each MP3 file at a sampling rate
of 44.1 kHz and at a bit rate of 128 kbps. Similarly each WMA
file at a sampling rate of 44.1 kHz and at a bit rate of 96 kbps.
• Playback order of MP3/WMA tracks may be different from the
one you have intended while recording. If a folder does not
include MP3/WMA tracks, they are ignored.