Service And Adjustments - Gravely ZT 915094 – 2350 Owner's/Operator's Manual

Table of Contents

Advertisement

Interval
Task
25 Hours or Every
Check Battery
Season
Lubricate Unit
50 Hours or Every
Check Fasteners
Season
100 Hours or Every
Check All Belts
Season
WARNING: AVOID INJURY. Read and understand
the entire Safety section before proceeding.
TIPPING SEAT FORWARD
Put steering levers up and tip seat forward (figure 8).
3
1. Steering Levers
1
2. Seat Tipped Forward
3. Mounting Hardware
Figure 8
Action
Keep battery and battery terminals clean (see Cleaning Battery and Battery
Cables on page 18).
Apply grease to zerk (1) on each front wheel
Check mower blade mounting hardware and all other fasteners. Replace
fasteners that are missing or damaged. Tighten all nuts and bolts to the
correct torque value.
Replace worn or deteriorated belts.
• Check hydrostatic belt (see REPLACING HYDROSTATIC BELT on
page 20 for hydrostatic belt location).
• Check PTO belt (see REPLACING PTO BELT on page 19 for PTO belt
location).

SERVICE AND ADJUSTMENTS

2
GB - 14
SEAT ADJUSTMENT
1. Tip the seat forward.
2. Loosen mounting hardware and slide seat forward or
backward to desired position. Tighten mounting
hardware (figure 8).
3. Tip seat back.
MOWER DECK REMOVAL AND INSTALLATION
Remove (Figure 9)
1. Remove PTO belt from electric clutch (see REPLACING
PTO BELT on page 19).
NOTE: Perform step 2 and 3 for the right and left side of
unit.
2. Remove drag link from mower deck.
3. Remove front and rear trunnions from lift arms.
4. Slide mower deck out from under unit.
Install (Figure 9)
1. Slide mower deck under unit.
NOTE: Perform step 2 and 3 for the right and left side of
unit.
2. Install front and rear trunnions on lift arms.
3. Install drag link on mower deck.
4. Install PTO belt on electric clutch (see REPLACING
PTO BELT on page 19).
5. Level and adjust pitch of mower deck (see LEVELLING
AND ADJUSTING PITCH OF MOWER DECK on
page 15).
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zt 915096 – 2250Zt 915098 – 1840Zt 915099 – 1634

Table of Contents