Connecting The Antenna (Aerial); Step 3: Preparing For Network Connection - Sony BDV-N9100WL Operating Instructions Manual

Connecting the antenna
(aerial)
Rear of the main unit
FM wire antenna (aerial)
(supplied)
Note
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
Tip
If you have poor FM reception, use a 75-ohm
coaxial cable (not supplied) to connect the main
unit to an outdoor FM antenna (aerial).
Step 3: Preparing for
Network Connection
Tip
To connect the system to your network, perform
[Easy Network Settings]. For details, see "Step 5:
Performing the Easy Setup" (page 29).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
or
• If you use other than a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
Broadband router
LAN cable (not supplied)
Tip
A shielded interface cable (LAN cable),
straight or crossover, is recommended.
GB
25