Table of Contents
Advertisement
5.
Reach in, press, and hold the CMOS button in for five seconds. You can access the CMOS
button after removing the memory door.
NOTE:
button will not clear CMOS if the power cord is connected.
NOTE:
Illustrated Parts & Service Map (IPSM) for that particular system.
6.
Close the memory door and replace the rear cover.
7.
Reconnect the external devices.
8.
Plug in the computer and turn on power.
NOTE:
you that configuration changes have occurred. Use Computer Setup to reset any special system
setups along with the date and time.
For instructions on Computer Setup, see
102 Appendix F Password security and resetting CMOS
Make sure you have disconnected the AC power cord from the wall outlet. The CMOS
For assistance locating the CMOS button and other system board components, see the
You will receive POST error messages after clearing CMOS and rebooting advising
Computer Setup (F10) Utility on page
69.
Hide quick links:
Advertisement
Table of Contents
