Standard Cmos Features - Gigabyte GA-MA790X-DS4 User Manual

Am2+/am2 socket motherboard for amd phenom fx processor/ amd phenom processor/ amd athlon 64 fx processor/ amd athlon 64 x2 dual-core processor/ amd athlon 64 processor/amd sempron processor
Hide thumbs Also See for GA-MA790X-DS4:
Table of Contents

Advertisement

2-3
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0 Master/Slave
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Configure your IDE/SATA devices by using one of the three methods below:
IDE Channel 2/3 Master/Slave
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Downloaded from
www.Manualslib.com

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
Drive A
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
: Move
Enter: Select
F5: Previous Values
IDE HDD Auto-Detection
IDE Channel 0 Master/Slave
• Auto
Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
• None
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
• Manual
Allows you to manually enter the specifications of the hard drive when the
hard drive access mode is set to CHS.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA,
Large.
IDE Auto-Detection
Extended IDE Drive Configure your IDE/SATA devices by using one of the two methods below:
• Auto
Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
• None
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), Large.
manuals search engine
Standard CMOS Features
Fri, Apr 22 2007
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
640K
239M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Default
- 39 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents