Threading - Brother TZ1 B651 Basic Repairs & Adjustments

COPY RIGHTS ©2004 QWIK-Fix-Publications™
At no time does QWIK-Fix-Publications or its licensees permit the copying in any format written or electronic of any of the data provided in any of their
publications
QWIK-Fix-Publications™
Upper threading methods
8
9
10
11
1
2
3
4
5
6 7
14:3

THREADING

INSTRUCTIONS
INSERT NEEDLE WITH
LONG GROOVE
FACING YOU
1.Through at least 2 of the
thread pin holes
2. Around thread guide
3. In to thread guide
4. Between tension discs
from right side
5. Over check spring
6. Under check spring
tensioner
7. Back up through thread
guide
8. Through thread take up
lever Right to left.
9. Down through thread
guide to the left of
the thread take up lever.
10. Through the thread
guide on needle bar.
11. Through the needle
front to back.
NB.
The threading format for
all lockstitch machines is
very similar although there
may be more or less thread
guides and the tension unit
make look different.
Follow these rules.
The DUD SYSTEM
DOWN In between
Tension Discs No 4
UP to the thread take up
lever No 8
DOWN to the needle No
11
17:6