Bissell 8920 User Manual page 20

Troubleshooting (Continued)
Cleaner not picking up solution
Possible Causes:
Ready Tools Dial may be at wrong setting
1
Tank may not be seated properly
2
Solution or Water Tank is Empty
3
2-in-1 Tank has picked up maximum
4
dirty water
If you should happen to need assistance during assembly or operations, call 1-800-263-2535.
20 16
Thank you for selecting a BISSELL product.
Please do not return this product to the store
Remedies:
Set Ready Tools Dial to either Floor
1
Cleaning or Hose Attachments Setting.
Pick up both the Water Tank and
2
Formula Tank and reseat them so
they fit snugly on the unit.
Check fluid levels in Heavy Duty
3
Bladder and Formula Tank.
Empty 2-in-1 Tank and Refill with
4
Clean Hot Tap water into the Heavy
Duty Bladder.