Viewing Slideshows - Canon PowerShot SX40 HS Getting Started

Viewing Slideshows

The focus check display is not available for movies.
Viewing Slideshows
You can automatically play back images recorded to a memory card.
If you press the qr buttons or turn the 5 dial during playback, the image
•
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function (p. 48) does not work during slideshows.
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
• In single image playback, you can also start a slideshow by pressing and
holding the m button and immediately pressing the
124
Choose [Slideshow].
Press the n button to choose
[Slideshow] in the 1 tab, then press the
m button.
Choose a setting.
Press the op buttons or turn the 5 dial
to choose a menu item, then press the qr
buttons to adjust the setting.
Repeat Repeats playback of images
Play Time Display time for each image
Transition effects when switching
Effect
between images
Choose [Start].
Press the op buttons or turn the 5 dial
to choose [Start], then press the m button.
The slideshow will start a few seconds
after [Loading image...] appears on the
screen.
You can pause/restart a slideshow by
pressing the m button again.
Press the n button to stop the
slideshow.
button.