Motorola V3m Service Manual page 44

Removing and Replacing the Hinge Assembly
G
44
11. Use a small flat tip screwdriver to press in the hinge cam while pushing the
hinge cam towards top (see Figure 31).
Figure 31. Hinge Cam Location
12. Rotate flip assembly away to disengage the hinge cam (see Figure 32).
Figure 32. Flip Assembly Removal
Ensure that display gasket and contact grounding hinge have been removed before
continuing. Failure to remove these parts may cause damage to the Hinge Cam and
Hinge Grounding Clip.
November 03, 2006
Flip assembly
V3m
062007o
062008o
6809501A48-A