Disassembly Of Traverse Unit - Panasonic SA-AK450GCP Service Manual

SA-AK450GCP
Step 2 Desolder wire at deck motor terminals.

10.16. Disassembly of Traverse Unit

· Follow the (Step 1) - (Step 5) of Item 10.4
· Follow the (Step 1) - (Step 4) of Item 10.5
Important notes: Ensure all the trays are in the "STOCK"
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in "STOCK" position,
please refer to (5.3 Setting the Tray In "STOCK" position
for CRS1 Service Manual order no. MD0509368C0)
Step 1: Press and hold the plunger lever and rotate the
gear as arrows shown until it stop.
Step 3 Remove Deck P.C.B.
Step 2: Push the traverse slide plate as arrow shown to
release the traverse unit.
Caution: Do not exert strong force on the traverse
slide plate.
36