Making Dvd Voice Clear-Clear Voice; Presetting Automatic Dvd Sound Increase Level; Changing The Display Brightness; Changing The Picture Tone - JVC FS-GD7 Instructions Manual

Making DVD Voice Clear—CLEAR VOICE
Remote
ONLY
This function allows you to easily understand the dialog of
DVD even with the volume turned down.
• This function only works for center-channel signal
encoded multi-channel disc.
Presetting Automatic DVD Sound Increase
Level—DVD LEVEL
The DVD sound is sometimes recorded at a lower level than
for other discs and sources. You can set the increase level for
the currently loaded DVD.
(at the same time)
NORMAL Original recording level.
MIDDLE Output level is increased (less than "HIGH").
HIGH Output level is increased (more than
"MIDDLE").
• Once the current DVD is ejected, this setting is canceled
and set automatically to "NORMAL."
16
Canceled
Remote
ONLY
NORMAL MIDDLE
HIGH
Changing the Display Brightness—DIMMER
You can dim the display window.
Remote Control:
(at the same time)
Main Unit:
DIM 1
DIM OFF
(Canceled)
DIM 1 Dims the display.
DIM 2 Erases the display illumination.
AUTO DIM Erase the display illumination when
disc playback starts.
• This function works only when playing
DVD/VCD/SVCD or JPEG files.
• The display illuminates when
playback stops.
Changing the Picture Tone—VFP (Video
Remote
Fine Processor)
ONLY
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1
Activate VFP.
2
Select a preset picture tone.
NORMAL
Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see next page).
DIM 1 DIM 2
AUTO DIM
DIM OFF
(Canceled)
DIM 2
AUTO DIM
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST 0
0
SATURATION
TINT 0
SHARPNESS 0
On the TV screen
NORMAL CINEMA
USER2 USER1